The digital video optical transceiver can transmit one or more 485/232/422 data channels on a single core fiber optic cable, enabling real-time synchronization, distortion free, and high-quality transmission of data signals on a single core fiber optic cable.
Product features
•Automatically compatible with multiple video formats including PAL, NTSC, and SECAM.
•SMT surface mounting technology, without electromagnetic, radio frequency, and ground current interference.
•The LED indicating the status of parameters such as power supply, link, and video can monitor the operation status of the system.
•Adaptive technology, overload protection, automatic recovery, no need for on-site electrical or optical adjustment during use.
•Industrial grade design and modular design make the equipment reliable and flexible, compact in structure, easy to install, and plug and play.
The equipment casing is not waterproof, and the equipment installation box should fully consider waterproofing.
Work status indicator light
LINK is the indicator light for the optical link. The light goes off when the optical link is disconnected and on when the optical link is connected. PWR is the power indicator light, which is on when powered on and off when not powered on.
1. Lightning protection, static electricity and grounding:
We strongly recommend that equipment installers fully consider the impact of lightning strikes on grounding and take grounding and lightning protection measures. Excessive static electricity can damage the optical components and data chips inside the equipment. It is recommended to disconnect the power supply of the optical terminal before plugging and unplugging the data port of the optical terminal.
2. Fiber optics and optical devices:
The optical device of the optical transceiver is very fragile. When inserting and unplugging optical fibers, it is necessary to be as careful as possible to avoid permanent damage to the optical components. It should be noted that the light source generated by the optical components of the optical transceiver can cause permanent damage to the human eye, so do not look directly at the optical components of the optical transceiver with your eyes. When testing the optical power of the optical transceiver, please use instruments such as optical power meters.
3. Equipment and installation steps:
(1) Fiber optic installation: After confirming that the fiber optic link meets the installation requirements, please carefully insert the fiber optic into the fiber optic interface of the optical transceiver.
(2) Data installation: The data interface consists of 2PIN wiring terminals, optical transmitter and receiver terminals, which are indicated on the label paper.