1. The power input of the optical transceiver is DC5V power supply. Please use the special power adapter provided in the equipment package to supply power. Power adapter
The voltage range of the regulator is ac125v-250v. Do not use it beyond the range.
2. The optical attenuation range is 20dB. In engineering application, the total loss of optical cable channel shall be less than 20dB, otherwise the optical receiver may be damaged
Normal optical signal is not received.
3. The optical transmitter and optical receiver are indoor models, and the service temperature and temperature shall be within the range of equipment operating parameters; No, yes
Can cause equipment damage.
4. When the optical transmitter and receiver are not connected to the pigtail connector, please seal it with a protective cap to prevent dust from entering and affecting the optical signal
Transmission.
5. The equipment is not equipped with maintenance accessories. If the equipment fails, please contact the equipment seller or the company's technology department immediately
Contact; Because the internal circuit of the equipment is an electrostatic sensitive device, do not disassemble the equipment for maintenance without permission.
